|
Robustness- und Zuverlässigkeitstests
|
JPG File |
Description: Robustness and reliability tests are carried out using state-of-the-art equipment in the Reliability Lab at OSRAM Opto Semiconductors. Beschreibung: Im Zuverlässigkeitslabor von OSRAM Opto Semiconductors werden Robustness- und Zuverlässigkeitstests mit hochmodernem Equipment durchgeführt. Source: Osram
|
13 MB |
23.09.2013 |
|
Belastungstests
|
JPG File |
Description: Thermal and electrical load tests in the Reliability Labs at OSRAM Opto Semiconductors Beschreibung: Temperatur- und elektrische Belastungstests in den Zuverlässigkeitslaboren von OSRAM Opto Semiconductors Source: Osram
|
3 MB |
23.09.2013 |
|
Temperaturwechselbelastung
|
JPG File |
Description: The Reliability Lab at OSRAM Opto Semiconductors: thermal fluctuation testing during powered operation Beschreibung: Im Zuverlässigkeitslabor von OSRAM Opto Semiconductors: Temperaturwechselbelastung beim elektrischem Betrieb Source: Osram
|
3 MB |
23.09.2013 |
|
Abwiegen Phosphor
|
JPG File |
Description: Warm white light or cold white light can be produced depending on the ratio of the phosphors. A lab technician at OSRAM Opto Semiconductors carefully weighs the different phosphors. Beschreibung: Je nach Mischverhältnis der Phosphore kann warm- oder eher kaltweißes Licht entstehen. Im Labor von OSRAM Opto Semiconductors wiegt eine Mitarbeiterin die Phosphormengen ab. Source: Osram
|
57 MB |
23.09.2013 |
|
Prüfung Kristallstruktur
|
JPG File |
Description: In a laboratory at OSRAM Opto Semiconductors a technician checks the crystal structure of a substrate material Beschreibung: Im Labor von OSRAM Opto Semiconductors: Ein Mitarbeiter prüft die Kristallstruktur eines Substratmaterials Source: Osram
|
34 MB |
23.09.2013 |
|
Elektro-optische Charakterisierung
|
JPG File |
Description: In an OSRAM Opto Semiconductors laboratory a high-power LED is mounted and adjusted for electro-optical characterization. Beschreibung: Im Labor von OSRAM Opto Semiconductors: Ein Mitarbeiter montiert und justiert Hochleistungs-LED zur elektro-optischen Charakterisierung. Source: Osram
|
40 MB |
23.09.2013 |
|
Optische Kontrolle Bonden
|
JPG File |
Description: An OSRAM Opto Semiconductors employee performs a visual check on the electrical connection between an LED and the substrate. Beschreibung: Ein Mitarbeiter von OSRAM Opto Semiconductors bei der optische Kontrolle einer elektrischen Verbindung zwischen LED und Substrat. Source: Osram
|
31 MB |
23.09.2013 |
|
Justage Sorter
|
JPG File |
Description: In a laboratory at OSRAM Opto Semiconductors a technician adjusts the LED sorter. Beschreibung: Im Labor von OSRAM Opto Semiconductors: Ein Mitarbeiter justiert den LED-Sorter Source: Osram
|
36 MB |
23.09.2013 |
|
LED-Charakterisierung
|
JPG File |
Description: In an OSRAM Opto Semiconductors laboratory an employee adjusts the optical apparatus for characterizing a red LED. Beschreibung: Im Labor von OSRAM Opto Semiconductors justiert ein Mitarbeiter einen optischen Aufbau zur Charakterisierung einer roten LED. Source: Osram
|
24 MB |
23.09.2013 |
|
Fotostrommessplatz
|
JPG File |
Description: Converters change the light color of a light emitting diode. At a converter test station in an OSRAM Opto Semiconductors laboratory a technician holds converter material in the beam delivered from optical apparatus. Beschreibung: Konverter verändern die Lichtfarbe einer Leuchtdiode. An einem Konverter-Messplatz im Labor von OSRAM Opto Semiconductors hält ein Mitarbeiter Konvertermaterial in den Strahlengang des optischen Aufbaus. Source: Osram
|
42 MB |
23.09.2013 |
|
Bestückung Maske in Fototechnik
|
JPG File |
Description: A photo technician in an OSRAM Opto Semiconductors fabrication laboratory places an exposure mask in a machine. Beschreibung: In der Labor-Fertigung von OSRAM Opto Semiconductors legt eine Mitarbeiterin in der Phototechnik eine sogenannte Belichtungsmaske ein. Source: Osram
|
22 MB |
23.09.2013 |
|
LED Packages
|
JPG File |
Description: LED are automatically encapsulated in the LED assembly of OSRAM Opto Semiconductors. Beschreibung: In der LED-Backend-Fertigung von OSRAM Opto Semiconductors werden LED automatisch vergossen. Source: Osram
|
26 MB |
23.09.2013 |
|
Manuelle Bestückung Kalotte
|
JPG File |
Description: An OSRAM employee places 6 inch wafers manually in a plate for a coating unit. Beschreibung: Eine OSRAM Mitarbeiterin bestückt eine Kalotte mit 6-Zoll-Wafern Source: Osram
|
13 MB |
23.09.2013 |
|
Vergleich Wafer
|
JPG File |
Description: An OSRAM employee shows the new wafer size: left- a new 6 inch wafer, right – the conventional 4 inch wafer. Beschreibung: Eine OSRAM Mitarbeiterin zeigt die neue Wafergröße zum Vergleich links ein Wafer mit 6 Zoll, rechts mit 4 Zoll. Source: Osram
|
9 MB |
23.09.2013 |
|
Standort OSRAM Opto Semiconductors Hong Kong
|
JPG File |
Description: Location OSRAM Opto Semiconductors Hong Kong Beschreibung: Standort OSRAM Opto Semiconductors Hong Kong Source: Osram
|
27 MB |
23.09.2013 |
|
Standort OSRAM Opto Semiconductors Northville
|
JPG File |
Description: Location OSRAM Opto Semiconductors Northville Beschreibung: Standort OSRAM Opto Semiconductors Northville Source: Osram
|
43 MB |
23.09.2013 |
|
Standort OSRAM Opto Semiconductors Penang
|
JPG File |
Description: Location OSRAM Opto Semiconductors Penang Beschreibung: Standort OSRAM Opto Semiconductors Penang Source: Osram
|
37 MB |
23.09.2013 |